Product Overview:

The integrated differential pressure flowmeter consists of standard or non-standard throttling devices, three valve groups, differential pressure transmitters, installation and connection accessories, etc; Gas, steam and other media can be equipped with super integrated differential pressure flow meters with multi parameter differential pressure transmitters,

This type of flowmeter does not require additional pressure and temperature measuring points, and can automatically compensate for temperature and pressure in the output signal, improving measurement accuracy.

Implement standard IS05167;  GB/T2624

Measure medium gases, liquids, and vapors

Types: flange type, clamp type, welded type

Nominal diameter DN: DN15 to DN1000mm (or larger)

Temperature of the tested medium -185 ℃ to+650 ℃

Voltage withstand range 0-32mpa

Pressure measurement methods include corner joint pressure measurement (including ring chamber pressure measurement and separate drilling pressure measurement), flange pressure measurement, and radial distance pressure measurement

Throttle/flange material: cast steel 304SS 316L HC Ti 15Crmo 310S

Protection level IP65

Accuracy level ± 1.0% ± 1.5%

Installation method: flange installation, flange clamping, welding

Before installing the straight pipe section, the first 5D and then the 3D D represent the inner diameter of the pipeline

Performance parameters

Scope of application: Steam, high-temperature gases, liquids

Caliber range: DN15 to DN1600

Medium temperature: -30 ℃ to+600 ℃

Sensor material: 304 stainless steel, 316L stainless steel, other customized materials

Sensor accuracy: 1.0%

Pressure rating: 1.6Mpa~25Mpa

Range ratio: 1:3

Connection method: flange connection, welding (high pressure)

For more product information, please consult our toll free hotline at +0086 400 880 6367