Product Overview:

An electromagnetic heat meter is primarily a device that conducts real-time measurements of the supply water temperature, return water temperature, and instantaneous flow rate of the energy-carrying medium (liquid water) in a heat exchange system. It calculates and stores the amount of cold or heat consumed by the system according to the thermodynamic energy calculation formula. The electromagnetic flow sensor utilizes Faraday's law of electromagnetic induction to linearly convert the instantaneous flow rate signal into an induced electromotive force, an electrical signal, thereby obtaining the instantaneous flow rate signal. The calculator integrates the flow rate signal with the temperature signal collected by the temperature sensor to obtain the required energy value.

Product Features:

 · Heating meter working mode, cooling meter working mode, and combined heating and cooling meter mode

 ·Four options are available: MJ/h, GJ/h, KWh/h, and MWh/h

 ·Flow output, heat output, cooling output, cold and heat state output, flow direction output

 ·16-bit embedded microprocessor converter, with full digital processing

·Capable of measuring all conductive liquids

Technical Requirements:

Diameter: DN10-DN1000

Output signal: 4~20mA

Communication mode: RS485, MODBUS protocol

Flow velocity range: 0.1~15M/S (upper limit) 0.5~10M/S (conventional)

Electrodes: Stainless Steel 316L, Hastelloy (HB and HC), Titanium, Tantalum, Platinum

Protection level: IP65, IP68 can be customized

Accuracy level: Level 1, Level 0.5

Power supply: Standard 220V power supply, customizable to 24V

Nominal pressure: 1.6MPa; 1.0MPa

For more detailed information about the product, please contact our toll-free hotline at +0086 400 880 6367