The portable ultrasonic flowmeter product adopts the principle of ultrasonic time difference to measure flow rate, which can achieve flow measurement of DN15~DN6000 pipelines, mobile multi-point measurement of flow rate, mobile multi-point measurement of flow rate, battery powered, with a total measurement time of up to 20 hours. Optional addition of heat measurement function. Not only can it measure flow, but it can also be equipped with ultrasonic heat metering function based on flow measurement, providing reference for the heating efficiency of the heating industry. Standard printing and recording function, which can directly print measurement results on site, with relevant setting parameters for convenient and fast recording. When an ultrasonic beam propagates in a liquid, the flow of the liquid will cause a slight change in propagation time, which is proportional to the flow velocity of the liquid. At zero flow rate, the time required for both sensors to emit and receive sound waves is the same. When the medium flows, the transmission time of sound waves in the upstream direction is greater than that in the downstream direction. It adopts advanced multi pulse technology, signal digital processing technology, and error correction technology, making flow meters more adaptable to the environment of industrial sites, and measuring more conveniently, economically, and accurately. The product has reached advanced levels both domestically and internationally. It has the characteristics of good stability, small zero drift, high measurement accuracy, wide range ratio, and strong anti-interference ability. Ultrasonic flowmeter is a non-contact instrument that can measure the flow rate of media with large diameters and can also be used for measuring media that are difficult to contact and observe. Its measurement accuracy is very high, almost unaffected by various parameters of the measured medium, especially solving the problem of flow that other instruments cannot move for multi-point measurement. Widely used in heating, municipal water supply, mobile multi-point measurement and other scenarios and fields.

Product Features:

1. Battery powered, easy to carry, multi-point measurement, can be used for mobile heat metering and monitoring.

2. Wide range of applicable calibers, no need to open the tube during the measurement process.

3. Using the time difference principle, the accuracy can reach 1.0%.

4. Fault self diagnosis function, data will not be lost after power failure.

Technical Specifications:

Measurement accuracy: 1%

Repeatability: 0.2%

Caliber range: DN10-3000mm

Measurement cycle: 500ms (2 times per second, 128 sets of data collected per cycle)

Working power supply: 220VAC/8-36VDC

Flow velocity: 64m/s (flow velocity resolution 0.001m/s)

Display: 2× 10 Chinese character backlit LCD can display instantaneous flow rate, positive, negative, net cumulative flow rate, flow rate, etc

Slot: 4× 4 touch keyboard (F4 host magnetic 4 keys) slot

External bound sensor:

External tied sensor is an installation method that directly binds the sensor to the outer surface of the measured pipeline to achieve flow measurement. It has the characteristics of being independent of the pipe diameter, simple installation, no need to stop production, and no pressure loss.

Optional toolbox, list: one portable ultrasonic flowmeter host, one pair of sensors, installation accessories, as well as card rails, coupling agents, chargers, etc.

For more product information, please consult our toll free hotline at +0086 400 880 6367